Hollywood Racks Car Mount Racks
|
Hollywood Racks Hitch Mount Racks
|
To determine the proper car rack to use, select your vechicle from the list below.
Do not use rack on any car on which it can not be properly mounted as described in instructions included with rack. Fit list is not complete and applies only to models in original and non-customized condition (no after-market spoilers, external spare tires, etc.)
Note! If you see a car reference that reads No in each column, this means that the car cannot be fitted with a strap-on type rack, and must be fitted with a receiver (hitch mount) in order to use our HR (hitch mount) racks.
- Install Hollywood strap-on racks on steel trunks only. Do not install on trunk lids made from fiberglass, aluminum or similar materials. Check with magnet to be sure its steel.
- Tighten all straps both before and after mounting bikes on the rack.
- Never install upper hooks to plastic, glass or fiberglass.
- Clean the surface of the trunk prior to installation.
- Use at least two tie-down straps or shock cords when securing bikes to the rack and keep bicycle tires at least one foot (30 cm) away from exhaust pipe(s).
- Check the rack, bikes and straps regularly during use.
- Drive slowly when the rack is used on bumpy or dirt roads.
The HRF4 can be used in two different modes as resting on the trunk and resting on the bumper. The charts below will indicate which mode, if any, is useable on your vehicle.
|
HR420, HR2000, HR2100, HR2200
Hitch Mounts: Almost any vehicle can be fitted with a trailer hitch. Hollywood hitch racks fit either 1-1/4" (class II) or 2" (class III) square receiver sizes. Please have the correct size professionally installed on your vehicle.
Vehicles with Externally Mounted Spare Tires: Use a hitch mounted rack.
Pickup Trucks: Use a hitch mounted rack.
|
